Ron L. Bishop Associates, Inc. Kryton Kryton
About Us Products Questions Contact Us
Cementitious & Chemical
Mechanical Anchors
Epoxy
Non-Explosive Demolition Material


1-800-77-EPOXY
1-800-773-7699



Powered by SiliconLink, Inc.
SiliconLink

redhead_logo.jpg (5786 bytes)
DYNABOLT®
SLEEVE
ANCHORS

  
 
 
DESCRIPTION / SUGGESTED SPECIFICATIONS

Versatile,
Heavy-Duty
Sleeve Anchor

 

dynabolt_prod1b.jpg (13092 bytes)

 

 

 

 

 

 

 

 

 

 

 

 

NEXT PAGE

Sleeve Type Anchors—
SPECIFIED FOR ANCHORAGE INTO CONCRETE, MASONRY, GROUT-FILLED BLOCK AND HOLLOW BLOCK
dynabolt_prod1a.jpg (8443 bytes)
Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.

Anchors are made of Plated Carbon Steel, or Type 18-8 Stainless Steel.

Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994.

Anchors are tested to ASTM E488 criteria.

 
ADVANTAGES

epcon_a7prod1e.jpg (309 bytes) Anchor diameter equals hole diameter   
epcon_a7prod1e.jpg (309 bytes) Available in hex head and six other head styles
epcon_a7prod1e.jpg (309 bytes) Available 1/4 - 3/4" diameter up to 6-1/4" length
epcon_a7prod1e.jpg (309 bytes) Zinc plated carbon steel and 304 stainless steel
epcon_a7prod1e.jpg (309 bytes) Provides full 360° hole contact over large area and
reduces concrete stress
epcon_a7prod1e.jpg (309 bytes) Heavy-loading capacity
epcon_a7prod1e.jpg (309 bytes) Preassembled for faster, easier installations
epcon_a7prod1e.jpg (309 bytes) Dynabolt can be installed through object to
be fastened
epcon_a7prod1e.jpg (309 bytes) Sleeve design improves holding power
epcon_a7prod1e.jpg (309 bytes) No pre-spotting of holes necessary
dynabolt_prod1c.jpg (31313 bytes)

 


Ron L. Bishop Associates, Inc.  1-800-77-EPOXY  1-800-773-7699
About Us  |  Products  |  Questions  |  Contact Us
Copyright © 2001-2008 Ron L. Bishop Associates, Inc. • All Rights Reserved.
All names and trademarks are the property of their respective companies.