Ron L. Bishop Associates, Inc. Kryton Kryton
About Us Products Questions Contact Us
Cementitious & Chemical
Mechanical Anchors
Epoxy
Non-Explosive Demolition Material


1-800-77-EPOXY
1-800-773-7699



Powered by SiliconLink, Inc.
SiliconLink

redhead_logo.jpg (5786 bytes)
HAMMER-SET™
ANCHORS

 w
w
w
DESCRIPTION / SUGGESTED SPECIFICATIONS

Nail - Drive
Anchors

 

ham_prod1a.jpg (6258 bytes)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NEXT PAGE

Hammer-Set Nail Drive Anchors—
SPECIFIED FOR ANCHORAGE INTO CONCRETE, BLOCK OR BRICK
ham_prod1b.jpg (5417 bytes)
The Hammer-Set one-piece zinc plated steel anchor consists of an expansion body and expander drive pin. Anchors meet or exceed GSA specification FF-S-325 Group V, Type 2, Class 3.
 
ADVANTAGES
epcon_a7prod1e.jpg (309 bytes) Fast, easy installation      
epcon_a7prod1e.jpg (309 bytes) Works in concrete, block and brick
epcon_a7prod1e.jpg (309 bytes) Install through material to be fastened
epcon_a7prod1e.jpg (309 bytes) Low profile mushroom head style
APPLICATIONS
ham_prod1c.jpg (11632 bytes) NOT FOR USE IN OVERHEAD APPLICATIONS*

epcon_a7prod1e.jpg (309 bytes) Electrical boxes
epcon_a7prod1e.jpg (309 bytes) Conduit clips
epcon_a7prod1e.jpg (309 bytes) Drywall track
epcon_a7prod1e.jpg (309 bytes) Roof flashing

APPROVALS/LISTINGS
Meets or exceeds GSA specification FF-S-325 Group V, Type 2, Class 3
INSTALLATION STEPS

1. Drill hole through material to be fastened into base material. (See selection chart for drill size).

2. Insert Hammer-Set into hole until head of anchor body is flush with material to be fastened. Tap the nail until flush with head of anchor.

3. Anchor is now set.
 
SELECTION CHART
HAMMER-SET
PART
NUMBER		 DESCRIPTION
In. (mm)		 DRILL
SIZE
In. (mm)		 MAX. FIXTURE
THICKNESS
In. (mm)		 MIN.
EMBEDMENT
In. (mm)		 MIN.
HOLE SIZE
In. (mm)		 QTY/WT
PER BOX
lbs.		 QTY/WT
PER
MASTER
CTN-lbs.
HS-1607 3/16 x 7/8 (4.8 x 22.2) 3/16 (4.8) 1/4 (6.4) 5/8 (15.9) 1-1/8 (28.6) 100/ 2.0 1000/ 20
HS-1406 1/4 x 3/4 (6.4 x 19.1) 1/4 (6.4) 1/8 (3.2) 5/8 (15.9) 1 (25.4) 100/ 2.2 1000/ 22
HS-1410 1/4 x 1 (6.4 x 25.4) 1/4 (6.4) 1/4 (6.4) 3/4 (19.1) 1-1/4 (31.8) 100/ 2.4 1000/ 24
HS-1412 1/4 x 1-1/4 (6.4 x 31.8) 1/4 (6.4) 1/2 (12.7) 3/4 (19.1) 1-1/2 (38.1) 100/ 2.6 1000/ 26
HS-1414 1/4 x 1-1/2 (6.4 x 38.1) 1/4 (6.4) 3/4 (19.1) 3/4 (19.1) 1-3/4 (44.5) 100/ 2.8 1000/ 28
HS-1420 1/4 x 2 (6.4 x 50.8) 1/4 (6.4) 1-1/4 (31.8) 3/4 (19.1) 2-1/4 (57.2) 100/ 3.5 1000/ 35


Ron L. Bishop Associates, Inc.  1-800-77-EPOXY  1-800-773-7699
About Us  |  Products  |  Questions  |  Contact Us
Copyright © 2001-2008 Ron L. Bishop Associates, Inc. • All Rights Reserved.
All names and trademarks are the property of their respective companies.