Ron L. Bishop Associates: Epoxy, Concrete Repair - Products - Mechanical Anchors; Ramset/Red Head

Cementitious & Chemical

Mechanical Anchors

Epoxy

Non-Explosive Demolition Material

1-800-77-EPOXY
1-800-773-7699

SiliconLink

*Large Diameter Tapcon (LDT^™) Anchors*


	DESCRIPTION / SUGGESTED SPECIFICATIONS

The Performance of a Chemical Anchor—The Ease of a Mechanical Installation

ldt_prod1b.jpg (7591 bytes)

NEXT PAGE

Self-threading Anchors—
SPECIFIED FOR ANCHORAGE INTO CONCRETE
ldt_prod1a.jpg (9609 bytes)

The LDT anchor is a high performance concrete anchor that cuts its own threads into concrete.

Anchor bodies are made of hardened carbon steel, plated with zinc or GRD 2000® (tested to ASTM B117A for greater corrosion resistance).

The anchors shall have a finished hex washer head with anti-rotation serrations to prevent anchor back-out. The head of the anchor is stamped with a length identification code for easy inspection.

The anchor shall be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994.

ADVANTAGES
SAVE TIME EASILY INSTALLED Installs in less than half the time of 1/2" wedge or adhesive application Simply drill a pilot hole and drive the LDT anchor EASILY REMOVED No torching or grinding required to remove anchors COMPLETE INSTALLATIONS IN HALF THE TIME	SAVE MONEY LOWER DRILL BIT COSTS Use 7/16", instead of more expensive 5/8", 9/16", or proprietary bits Drill shallower holes USE STANDARD ANSI BITS No special proprietary bits to purchase or lose Reduce chances for anchor failure due to incorrect bit usage LOWER MAINTENANCE COSTS


		Ron L. Bishop Associates, Inc. 1-800-77-EPOXY 1-800-773-7699 About Us \| Products \| Questions \| Contact Us