Dependable
Heavy-Duty,
Inspectable
Wedge Type
Expansion
Anchor
NEXT PAGE
|
Wedge Type Anchors —
SPECIFIED FOR ANCHORAGE INTO CONCRETE
Wedge anchors feature a type 18-8 stainless steel split expansion
ring and a threaded stud bolt body and integral cone expander, nut and washer. Anchor bodies
are made of plated carbon steel, hot-dipped galvanized carbon steel, type
304 stainless steel or type 316 stainless steel as identified in the drawings or other
notations.The exposed end of the anchor is stamped
to identify anchor length. Stampings should be preserved during installation for any
subsequent embedment verification.
Use carbide tipped hammer drill bits made in accordance to
ANSI B212.15-1994 to install anchors.
Anchors tested to ASTM E488 criteria and listed by ICBO and
SBCCI. Anchors are listed by the following agencies as required by the local building
code: UL, FM, City of Los Angeles, California State Fire Marshal and Cal Trans. |
Versatile fully threaded
design is standard on sizes up to 3/4" diameter and 7" length